Following the prior introduction of the Strike-X ST case, the Strike-X GT(stands for Gaming Tower) is finally here to meet the needs of those who are in need of a high-end case but a lesser appetite for space. The Strike-X GT offers great flexibility for expansion with excellent cooling ability. With the HDD converters included in this case, user can easily install up to 7x2.5" HDDs or 3.5" HDDs, and furthermore, each converter also acts as a fan bracket for a 12cm fan to be mounted at the opposite side of the HDD to cool the heat that HDD generates. Moreover, the converters can also be mounted vertically to the front of chassis with a 12cm fan installed to draw in cool air to force out the heat to the rear of chassis. If you are concerned with the heat issue in a PC case and yet want to keep the expansion ability, Strike-X GT is the case of your choice.
Features:
- High performance "Mid-Tower" for gamers and enthusiast.
- Aggressive "X" concept design case - a gamers' dream!
- Supports longer high-end VGA cards up to 295 mm.
- Supports 3 x 5.25" bays and maximum 6 x 2.5"/3.5" HDDs (internal) with HDD convertor bracket.
- Anti-vibration pad included to dampen PSU vibration.
- Each HDD bracket can mount a 12cm fan to cool each individually.
- "Easy-install" screw-less kits for the 5.25" devices.
- 3 x USB2.0 + 1 x USB3.0 and Audio/Mic ports are easily accessible from the top of case.
- CPU hole is pre-drilled on the Motherboard for easy access to cooler installation.
- Cable management holes are pre-drilled with high end rubber protection.
- Dust filter included to prevent dust entering from the bottom of case.
- Supports water-cooling
Airflow:
Superb airflow - install up to 8 fans !!
- Front - 2 x 12cm RED LED fans (1 x 12cm included)
- Top - 2 x 12 or 2 x 14cm fans (optional)
- Bottom - 1 x 12 or 14cm fan (optional)
- Left Side - 2 x 12cm fans (optional)
- Rear - 1 x 12cm RED LED fan (included)
SPECIFICATION:
| Case Type |
Middle Tower |
| Material |
SECC 0.6mm |
| Motherboards |
Micro ATX/ATX |
| Case Dimensions |
465mm (H) x 190mm (W) x 490mm (D) |
| Drive Bays |
3x 5.25" (Exposed) / 6 x 3.5" HDD or 2.5" HDD |
| Expansion Slots |
7 Slots |
| Max length space available for PCI slots |
295mm |
| I/O Ports |
1x USB 3.0 / 3x USB2.0 / Audio+Mic (HD audio) |
