FanLinc - INSTEON Ceiling Fan and Light Controller, Fixture Module (Dual-Band)

Overview

• Control a ceiling fan and light without running wires for a wall switch
• Fits inside most ceiling fan canopies
• High, Medium, Low and Off fan speed control
• Full dimming control for light kit
• Featuring dual-band INSTEON technology for the fastest and most reliable performance

FanLinc is designed to easily incorporate both fan speed and light control within your INSTEON network. It is a dual-load responder simultaneously acting as a light fixture dimmer plus a 4 speed fan controller (Off, Low, Medium & High). Control the fan speed or lighting kit wirelessly from any INSTEON controller, be it a handheld remote, wall keypad or even your smartphone. Tie it in with a computer controller that can trigger all the fans in the house to turn on (at a predetermined speed) to help circulate the air, reducing costs associated with running your air conditioner.

How FanLinc Works
FanLinc is compatible with most ceiling fans and installs inside the fan cowling between the fan and incoming power. You'll want to make sure you have access to both the fan and (if your fan has a lighting kit attached) the light control wires.

Before finalizing your FanLinc installation you'll want to link it to your selected controllers. Because you don't want to be removing your ceiling fan every time you want to add or remove links, we recommend using software such as HouseLinc to manage all of this from your computer.

Note: FanLinc is not compatible with fans that have remote control built into the motor.

Control Ideas
While there are a wide variety of INSTEON controllers to choose from, let us provide some suggestions...

• For a truly wireless solution use a handheld 8-scene RemoteLinc to control the ceiling fan from the couch, bedside or mount it anywhere on the wall using a wall mount bracket. Links between RemoteLinc and FanLinc can be made manually however, software configuration recommended.
• For a more permanent solution, go with an in-wall 6-button KeypadLinc. KeypadLinc replaces any existing wall switch and provides wireless communications to the FanLinc. Links between KeypadLinc and FanLinc can be made manually however, software configuration recommended. pre-labeled FanLinc buttons or Custom-etched keys are sold separately.

Use SmartLinc to control FanLinc or your entire home from your smartphone or computer. Unlock features and manage links, create events and more using hardware/software combinations such as such as HouseLinc or ISY-99.

What's Included

• FanLinc - INSTEON Ceiling Fan and Light Controller, Fixture Module (Dual-Band)
• 4 Wire Nuts
• 1 Cable Tie
• Quick Start Guide

Specification:

General
Brand	INSTEON
Manufacturer Product No.	2475F
UPC	813922011548
Patent No.	U.S. Patent No. 7,345,998, International patents pending
Warranty	2 years, limited
INSTEON
INSTEON ID	1
Scenes	2 responder groups
Maximum Scene Links	400 (combined controller + responder)
Scene Commands Supported as Responder	On	Off
	Brighten	Dim
	Fast On	Fast Off
Software Configurable	Yes, Always
RF Range	100' Open air
X10 Support	Yes
X10 Addresses	2 Max
Beeper	Yes

Operation:

Light Dimmer		Fan Controller
INSTEON	Scene/Group 1	INSTEON	Scene/Group 2
Brightness Levels	32	Fan Speeds	4 (Off, Slow, Medium & Fast)
Dimmer Control	On, Off, Fast On, Fast Off and Dim / Brights + X10 commands	Fan Control	On, Off, Fast On, Fast Off and Dim / Brights + X10 commands
		Brightness=: Off 1% - 49% 50% - 99% 100%	Fan is: Off Slow Medium Fast
LED	Dual Color, Green & Red	LED	Dual Color, Green & Red
	Green=ON Red=Off Setup=Varies		Green=On Red=Off Setup=Varies
Set Button	Black	Set Button	Black
X10	1 Address, unassigned by default	X10 - On/Off only	1 Address, unassigned by default

Mechanical:

Wires	4, 16 gauge
	Colors: Black - Hot / Line Blue - Light / Load Red - Fan / Load White - Neutral
Case Color	White
Plastic	UV Stabilized ABS
Dimensions	4.5" x 2.0" x .875" (114mm x 50.8mm x 22.2mm)
Weight	112g (0.25 lb)
Operating Environment	Indoors
Electrical
Retains all settings without power	Yes, all saved in Non-volatile EEPROM
Voltage	120VAC, Single Phase
Frequency	60Hz
Maximum Dimmer Load	300 Watts
Maximum Fan Load	1 Amp
Standby Power Consumption	< 1 Watt
Safety Approved	ETL