Light up your smart home with INSTEON LED Bulb: the first remotely controllable, fully dimmable networked light bulb on the market! With the innovative INSTEON LED Bulb, you directly control the bulb itself-no need for plug-in modules or hardwired switches.
This revolutionary LED bulb is the first of its kind to offer networked remote control. Now you can easily build your own home control system without having to ever replace a wall switch. Easily link to all INSTEON controllers, including handheld remotes, wall keypads or even the SmartLinc Hub, which turns your smartphone or tablet into a fully functioning remote control for not only the INSTEON LED Bulb, but your entire home network (via the free iOS/Android INSTEON app).
Featuring INSTEON's patented dual-band technology, wirelessly controlling your lights has never been more accessible or economical. Simply put your chosen INSTEON controller into linking mode, screw INSTEON LED Bulb into a light socket and the two are instantly linked. Installing the INSTEON LED Bulb is as easy as 1-2-3:
Use home management software (such as HouseLinc) to customize INSTEON LED Bulb's settings. Adjust its brightness levels and ramp rates, link it to additional controllers and add it to multi-device scenes.
INSTEON LED Bulb
Elegant, High-Quality Design
INSTEON LED Bulb is a traditionally-styled light bulb with the same natural white glow as an incandescent bulb. The classic shape and white finish will fit in with any decorative lighting fixtures.
Use software to incorporate one or multiple INSTEON LED Bulbs to your INSTEON scenes. INSTEON LED Bulb's wide, dimming range and low energy levels make it ideal for adding decorative lighting fixtures to your INSTEON network.
All INSTEON LED Bulb settings are stored in its internal non-volatile memory and will not be lost during power failures. In the event of a power loss, INSTEON LED Bulb will return to its last brightness level when power is restored.
To compliment the simple design, the INSTEON LED Bulb does not have a set button for linking. When power is applied to the bulb (either by a lamp switch or wall switch), it will enter linking mode. To add a controller, simply place your controller into linking mode, screw-in the bulb (or turn the switch on the lamp) and they will link. The bulb default is 100% brightness with a 0.5 second ramp rate. To adjust these settings use management software such as HouseLinc.
When in use, INSTEON LED Bulb emits a subtle buzzing noise that is barely noticeable. However, when several bulbs are installed in a single location, the buzzing may become more apparent.
Manufacturer product no
2672-222, INSTEON LED Bulb, 8 Watt (60W)
2 years, limited
INSTEON powerline mesh repeater
INSTEON RF mesh repeater
Load brightness levels
32 (256 with software)
Commands supported as responder
Up to 50 meters (open air)
Phase bridge detect beacon
INSTEON device category
0x01 dimmable lighting control
INSTEON device subcategory
0x3A (915MHz RF frequency)
Medium Edison light bulb socket
Screw clamp connections
2.82" (72mm) diameter, 4.68" (119mm) tall (regular light bulb is 2.66"diameter and 4.28"tall)