Yet another case fan of the well known Slip Stream series. The Slip Stream 120 PWM Adjustable VR comes along with a fan controller with PWM to VR switch, providing the feature to adjust fan speed as required. By keeping the well-proved structure with a small center hub and large blades, high air flow is generated at a low RPM, enabeling high efficiency at a low noise level. Turning the fan controller knob in PWM mode adjusts the PWM range from a minimum of 470 to 1340 rpm to a maximum of 740 to 1900 rpm. Running in VR mode, PWM will be cut off and fan speed can be adjusted between 500 to 1900 rpm.
- High efficiency - low noise
Built in typical Slip Stream case fan structure, with a small dimensioned center hub and large blades, the Slip Stream 120 PWM Adjustable VR provides high efficiency at a low noise level.
PWM / VR switch
The Slip Stream 120 PWM Adjustable VR comes along with a PCI bracket switch allowing to choose between PWM and VR mode. By sliding the switch the corresponding mode will be chosen.
Please note: In order to take advantage of PWM function, please use the motherboard with PWM features build-in.
Fan Speed control in PWM and VR mode
Slip Stream 120 PWM Adjustable VR is equipped with a fan controller. By turning the knob, PWM-range or fixed speed in VR mode can be adjusted.
Please note: PWM function will not work if the fan is connected via 4-Pin peripheral connector or connected to 3-Pin fan port. In this case, the fan will spin at the maximum speed.
The case fan comes with an adaptor for 4-Pin Molex connector.
- Model name:
Slip Stream 120 PWM Adjustable VR
- Modell No.:
120 x 120 x 25 mm / 4.72 x 4.72 x 0.98 in
- Fan Speed:
minimum 470 (±25%) - 1,340 rpm (±10%)
maximum 740 (±25%) - 1,900 rpm (±10%)
500 (±200) - 1,900 rpm (±10%)
- Noise Level:
minimum 7.05 - 27.3 dBA
maximum 9.8 - 37.0 dBA
7.5 - 37.0 dBA
- Air Flow:
minimum 23.0 - 76.53 CFM (39 - 130 m³/h)
maximum 37.15 - 110.31 CFM (63 - 187 m³/h)
24.5 - 110.31 CFM (41 - 187 m³/h)
- Static Pressure:
minimum 0.10 - 1.06 mmH2O / 0.98 - 10.40 Pa
maximum 0.29 - 2.30 mmH2O / 2.84 - 22.56 Pa
0.12 - 2.30 mmH2O / 1.18 - 22.56 Pa
146.5 g / 5.17 oz
- Bearing Type: